Loading...

KDM

CREATE THE HIGHEST POSSIBLE VALUE

L - MODEL

NC LEVELLER FEEDER


OVERVIEW

  • Outstanding levelling correction of thin sheets used in electronic components, etc
  • L-models can be installed at restricted spaces smaller than 4 meters
  • Constant-brake for absorbing inertia in uncoiler is applied
  • The speed can be changed through uncoiler inverter control

SPECIFICATIONS
L LINE SPECIFICATION  
L-MODEL
  Unit 300L-500L 600L-900L 1000L-1300L 1400L
THICKNESS mm 0.3~3.2
COIL WIDTH mm 50~300 50~900 50~1,300 50~1,400
COIL OUT DIA mm 1,200
COIL WEIGHT Kg 3,000~10,000
FEEDING LENGTH mm Max Input Value 9999.99
LINE SPEED m/min 20
L Levelling correction capability (Based on tensile strength of 40kgf/㎜2)  
  300L 400L 500L 600L 700L 800L 900L 1000L 1100L 1200L 1300L 1400L
LEVELLER ROLL LENGTH(mm) 330 430 530 630 730 830 930 1030 1130 1230 1330 1430
      THICKNESS (mm) 0.3~0.8   300   400   500   600 700 800 900 1000 1100 1200 1300 1400
1
1.2 650 750 850 950 950 950 950 950
1.6 430 425 420 420 420 420 420 420 420 420
1.8 350 345 345 340 340 340 340 340 340 340 340
2 270 270 260 260 250 250 250 250 250 250 250 250
2.3 250 250 240 240 230 230 200 200 200 200 200 200
2.6 230 230 230 200 200 200 170 170 170 170 170 170
3.2 200 200 180 180 120 120 120 100 100 100 100 100
 
media

OPTION

WORK ROLL OPEN
Roll cleaning can be easily done through work roll open type
For MG/SL models only
ZIGZAG SYSTEM
It transfers leveller feeder from side to side to operate multiple processes of circular BLK'
END SHEARING
It is used to cut the front or end part of coil when recoiling
Hydraulic drive
DRUM SUPPORT
It is possible to prevent uncoiler from drooping when using materials of more than 1,200mm x 10Ton
WORK ROLL SERVO UP/DOWN
It is operated by servo For same operations, automatic setting is possible after entering levelling adjustment
OILER
Semi Automatic : Oil injection according to timer setting
Automatic : Oil injection according to timer setting
  Oil reuse through recycling system