Loading...

KDM

CREATE THE HIGHEST POSSIBLE VALUE

HT-MODEL

NC LEVELLER FEEDER


OVERVIEW

  • Flatness operation can be easily performed when levelling high tension thick plates
  • Coil injection in the initial stage can be easily performed by applying inserting device and loop table
  • Rotational speed in uncoiler can be controlled
  • Electric power is strengthened by applying hydraulic pressure on work rolls and feed rolls

SPECIFICATIONS
HT LINE SPECIFICATION
HT-MODEL
Unit 300HT-500HT 600HT-800HT 900HT-1200HT 1300HT-1500HT 1600HT-1800HT
THICKNESS mm 2.3~14.0
COIL WIDTH mm 100~500 100~800 100~1200 100~1,500 100~1,800
COIL OUT DIA mm 1,500
COIL WEIGHT Kg 7,000~20,000
FEEDING LENGTH mm Max Input Value 9999.99
LINE SPEED m/min 24
HT Levelling correction capability (Based on tensile strength of 60kgf/㎜2)
300HT 400HT 500HT 600HT 700HT 800HT 900HT 1000HT 1200HT 1400HT 1600HT 1800HT
LEVELLER ROLL LENGTH(mm) 330 430 530 630 730 830 930 1,030 1,230 1,430 1,630 1,830
THICKNESS(mm) 1.2~3.0 250 350 450 550 650 750 850 950 1,150 1,350 1,600 1,800
3.2
4.0
4.5 900 900 900 900 900
5.0 735 730 730 730 730 730
6.0 740 550 545 545 545 545 545
7.0 570 550 390 380 380 380 380 380
8.0 400 400 390 290 280 270 280 280 280
9.0 410 300 300 290 220 215 215 215
11.0 290 310 235 230 230 160 150
media

 

OPTION

WORK ROLL OPEN
Roll cleaning can be easily done through work roll open type
For MG/SL models only
ZIGZAG SYSTEM
It transfers leveller feeder from side to side to operate multiple processes of circular BLK'
END SHEARING
It is used to cut the front or end part of coil when recoiling
Hydraulic drive
DRUM SUPPORT
It is possible to prevent uncoiler from drooping when using materials of more than 1,200mm x 10Ton
WORK ROLL SERVO UP/DOWN
It is operated by servo For same operations, automatic setting is possible after entering levelling adjustment
OILER
Semi Automatic : Oil injection according to timer setting
Automatic : Oil injection according to timer setting
  Oil reuse through recycling system