Loading...

KDM

CREATE THE HIGHEST POSSIBLE VALUE

ST-MODEL

NC LEVELLER FEEDER


OVERVIEW

  • It is a mixed type of leveller (T-Type) and uncoiler (MT-Type)
  • Pad band and coil lift are applied to facilitate coil injection in the initial stage
  • Constant-brake for absorbing inertia in uncoiler and caliper brake are applied
  • It is possible to prevent coil from twisting by applying uncoiler/opener inverter controls

SPECIFICATIONS
ST LINE SPECIFICATION  
ST-MODEL
  Unit 300ST-400ST 500ST-800ST 900ST-1200ST 1300ST-1800ST
THICKNESS mm 1.2~8.0
COIL WIDTH mm 100~400 100~800 200~1,200 300~1,800
COIL OUT DIA mm 1,500 1,500~1,800 1,800
COIL WEIGHT Kg 7,000~20,000
FEEDING LENGTH mm Max Input Value 9999.99
LINE SPEED m/min 24
ST Levelling correction capability (Based on tensile strength of 45kgf/㎜2)  
  300ST 400ST 500ST 600ST 700ST 800ST 900ST 1000ST 1200ST 1400ST 1600ST 1800ST
LEVELLER ROLL LENGTH(mm) 330 430 530 630 730 830 930 1,030 1,230 1,430 1,630 1,830
    THICKNESS (mm) 1.2~3.0     250     350     450     550     650   750   950 950 1,150 1,350 1,550 1,750
3.2
4.0 900 900 900 900 900
4.5 740 735 730 730 730 730 730
5.0 570 550 550 545 545 545 545 545
6.0 410 400 400 390 390 380 380 380 380 380
 
media

 

 

OPTION

WORK ROLL OPEN
Roll cleaning can be easily done through work roll open type
For MG/SL models only
ZIGZAG SYSTEM
It transfers leveller feeder from side to side to operate multiple processes of circular BLK'
END SHEARING
It is used to cut the front or end part of coil when recoiling
Hydraulic drive
DRUM SUPPORT
It is possible to prevent uncoiler from drooping when using materials of more than 1,200mm x 10Ton
WORK ROLL SERVO UP/DOWN
It is operated by servo For same operations, automatic setting is possible after entering levelling adjustment
OILER
Semi Automatic : Oil injection according to timer setting
Automatic : Oil injection according to timer setting
  Oil reuse through recycling system