Loading...

KDM

CREATE THE HIGHEST POSSIBLE VALUE

SL-MODEL

NC LEVELLER FEEDER


OVERVIEW

  • Flatness operation for materials smaller than 0.2T~1.6T can be precisely performed
  • Aluminum and nonferrous materials can be used in SL- models
  • High speed operation beyond 60 spm is possible
  • Constant-brake for absorbing inertia in uncoiler is applied

SPECIFICATIONS
SL LINE SPECIFICATION  
SL-MODEL
  Unit 300SL-500SL 600SL -900SL 1000SL -1300SL 1400SL
THICKNESS mm 0.2~1.6
COIL WIDTH mm 100~300 100~900 100~1,300 100~1,400
COIL OUT DIA mm 1,200
COIL WEIGHT Kg 3,000~10,000
FEEDING LENGTH mm Max Input Value 9999.99
LINE SPEED m/min 20
SL Levelling correction capability (Based on tensile strength of 40kgf/㎜2)  
  300SL 400SL 500SL 600SL 700SL 800SL 900SL 1000SL 1100SL 1200SL 1300SL 1400SL
LEVELLER ROLL LENGTH(mm) 330 430 530 630 730 830 930 1030 1130 1230 1330 1430
    THICKNESS (mm) 0.3~0.8   300   400   500   600 700 800 900 1000 1100 1200 1300 1400
1
1.2 650 750 850 950 950 950 950 950
1.6 430 425 420 420 420 420 420 420 420 420
1.8 350 345 345 340 340 340 340 340 340 340 340
2 270 270 260 260 250 250 250 250 250 250 250 250
2.3 250 250 240 240 230 230 200 200 200 200 200 200
 
media

 

OPTION

WORK ROLL OPEN
Roll cleaning can be easily done through work roll open type
For MG/SL models only
ZIGZAG SYSTEM
It transfers leveller feeder from side to side to operate multiple processes of circular BLK'
END SHEARING
It is used to cut the front or end part of coil when recoiling
Hydraulic drive
DRUM SUPPORT
It is possible to prevent uncoiler from drooping when using materials of more than 1,200mm x 10Ton
WORK ROLL SERVO UP/DOWN
It is operated by servo For same operations, automatic setting is possible after entering levelling adjustment
OILER
Semi Automatic : Oil injection according to timer setting
Automatic : Oil injection according to timer setting
  Oil reuse through recycling system