Loading...

KDM

CREATE THE HIGHEST POSSIBLE VALUE

CRADLE

NC LEVELLER FEEDER


OVERVIEW

  • Inserting materials can be performed only by UP-LOOP method
  • Coil materials can be easily mounted by putting them into the cradle
  • Inserting device and loop table are applied to facilitate coil injection in the initial stage
  • It is possible to adjust the cradle according to material widths

SPECIFICATIONS
CRADLE LINE SPECIFICATION  
CRADLE-MODEL
  Unit 300-500 600-800 900-1200 1300-1500 1600-1800
THICKNESS mm 1.5~14.0
COIL WIDTH mm 200~500 200~800 200~1200 200~1,500 200~1,800
FEEDING LENGTH mm Max Input Value 9999.99
LINE SPEED m/min 20
media

 

OPTION

WORK ROLL OPEN
Roll cleaning can be easily done through work roll open type
For MG/SL models only
ZIGZAG SYSTEM
It transfers leveller feeder from side to side to operate multiple processes of circular BLK'
END SHEARING
It is used to cut the front or end part of coil when recoiling
Hydraulic drive
DRUM SUPPORT
It is possible to prevent uncoiler from drooping when using materials of more than 1,200mm x 10Ton
WORK ROLL SERVO UP/DOWN
It is operated by servo For same operations, automatic setting is possible after entering levelling adjustment
OILER
Semi Automatic : Oil injection according to timer setting
Automatic : Oil injection according to timer setting
  Oil reuse through recycling system